Showing posts with label overcycler3. Show all posts
Showing posts with label overcycler3. Show all posts

Friday, January 16, 2026

It's over (cycler)

Hello,

After about a year and a half after the first Overcycler sold, I've chosen to stop manufacturing it...

Long story short, it is too burdensome to even produce one batch per month. I do love the fact that is sells well, being a labour of love, but for many reasons, it takes a bit of my health for each batch (stress, meeting deadlines, necessary attention to detail, ...).

I hope this project will end being manufactured again by some company in the synth business, I wouldn't ask for a lot of money on each sale to sell the rights even (and I do love Pi as a symbol of laicist love ;).

For now, the project stays open-source and free software and located at https://github.com/gligli/overcycler. Eg. it wouldn't require a huge effort to maintain the JLCPCB bill of materials, and besides PCBs, the rest is off the shelf form mouser, aliexpress, ...

As a side note, stopping production will also help me focus on my other projects and my music.

Of course I'll continue doing after-sales support but that's about it.

Fabrice GUILHAUME aka. GliGli.

Saturday, June 7, 2025

Overcycler back in stock!

The new batch of Overcycler is now ready at https://gligli.store !

From now on, only the fully built version will be stocked.

 Edit: A new batch of 10 is available!

Monday, November 11, 2024

New Overcycler firmware release (build 2024-10-29)

What's new:

• New factory presets from Solidtrax.
• Firmware speed improvements, now the user interface won't slow down on modulation-heavy presets.
• New "Amplifier level" parameter, that can be used to level the volume of patches or to add even more overdrive at high levels.
• New "Wave Folder" WaveMod, that vertically (through amplitude) folds waveforms, ie. when they go past the maximum, they fold (or "bounce") back, and the WaveMod amount is the pre-amplification (from 1 to 16).
• New "Bit Crusher" WaveMod, that works by lowering the amplitude resolution of the single cycle (contrary to the "Grit" one, which lowers the frequency resolution).
• New "LFO Trigger" options, to reset the LFOs on each key press and to control how many periods they run.
• LFOs at speed 0 can now be used as a source of constant modulation.
• Patch names, that can be edited on a computer.
• Added "Perc" and "FX" as preset type.
• When the arpeggiator is in hold, new notes can be assigned regularly, allowing to play over an arpeggio pattern.
• Many user interface usability improvements.
• Bug fixes.

Download links:

https://github.com/gligli/overcycler/releases/tag/build_20241029

Edit: By the way, the synth will be back in stock next week! 

Thursday, October 24, 2024

Overcycler demo by Solidtrax / next firmware release

Solidtrax ( https://solidtrax.nl/ ) posted a great demo of presets he made for the Overcycler :)(many of these presets plus some more he made will be factory presets for the next firmware release).

By the way, the next firmware is currently in beta stage and will be released soon!

Here will be the major changes:

  • Firmware speed improvements, now the UI won't slow down on modulation-heavy presets.
  • New "Amplifier level" parameter, that can be used to level the volume of patches or to add even more overdrive at high levels.
  • New "Wave Folder" WaveMod, that vertically (through amplitude) folds waveforms, ie. when they go past the maximum, they fold (or "bounce") back, and the WaveMod amount is the pre-amplification (from 1 to 16).
  • New "Bit Crusher" WaveMod, that works by lowering the amplitude resolution of the single cycle (contrary to the "Grit" one, which lowers the frequency resolution).
  • New "LFO Trigger" options, to reset the LFOs on each key press and to control how many periods they run.
  • Patch names, that can be edited on a computer.
  • Many UI usability improvements.

Monday, August 19, 2024

Overcyler first batch ready

The first batch of Overcycler is now ready at https://gligli.store :)

For now, only the fully built version is stocked, DIY version will be available next batch!

Wednesday, August 7, 2024

GliGli's shop online!

I set up a shop to sell Overcycler, the link is: http://gligli.store (the first batch of 10 will soon be available there).

The final price for the fully assembled version is 314€ and the DIY will be 264€.

By the way, "Magical Synth Adventure" has posted a video showcasing Overcycler through sonicstate.com on Youtube :)



Edit: some photos of the synth:


Monday, June 24, 2024

Overcycler3 final prototype / factory patches demo

Due to issues with the first enclosure/PCB prototype, the project had a bit of delay, sorry for that!
The hardware is now based on a more "standard" PacTec PT-10 enclosure, and we had to redo the whole PCB so that it fits the form factor.

All in all, this made Overcycler way more ergonomic, with the panel now angled, and the 10 potentiometers and keypad below the screen.
This is also due to the reworked user interface, which uses digits to access 10 pages of controls, and A/B/C/D for options per page (* and # being global shortcuts).

I have made a video of the 15 (so far) factory patches. Finish will be slightly different in the final version (screws, ...) but this is very close to the final design.

Monday, February 5, 2024

Overcycler3 firmware done!

I have finished porting the firmware, and I am happy: I had no major modification to do on the prototype for everything to work :)

At a glance, what I added:
- Mono aftertouch (or "channel pressure").
- Automatic filter tuning.
- A bootloader, to allow easy and riskless firmware updates.
- A cleaner MIDI implementation with CC and NRPN.

By the way, I was able to implement the WaveMod called "crossover" in true polyphony, and even allow it on the 2 oscillators, a small demo:

This allows a 4 single cycle sound as "partials", here I modulate it with the oscillators envelope, we can also hear the aftertouch modulating the filter brightness.

Thursday, January 25, 2024

Overcycler3 update

The PCB design is finished, and I received the (almost) entirely populated first prototypes from https://jlcpcb.com/ (they didn't have the SSI2144).

Here's a picture of the PCB:

I am now working on porting my firmware on this new version.

By the way, here's what has changed since my earlier post:
- One more envelope, dedicated to oscillators (the filter envelope was used beforehand, but it felt a bit cheap...).
- Instead of a SDCard slot, I now use a soldered flash chip, which will be accessable through USB.
- Shipped with a machined enclosure, the potentiometers, the display, the 16 keys keypad, the knobs, and probably a vinyl for the panel, assemble it yourself (about 250€), or entirely assembled (about 300€).

Tuesday, October 10, 2023

Overcycler as a fully assembled SMT PCB

Hello!

Now that there are cheap SMT clones of the SSM2044, I thought I could finally make this synth an affordable and easy to build DIY.

My idea is to offer this synth as a fully soldered (almost) entirely SMT PCB, and let the users wire the panel (10 potentiometers, a 40*4 character display and a 16 keys keyboard) and build the enclosure.

For now, it's hard to give a cost estimation, but let's say it would (probably) be around 200€ for a fully assembled board (add less than 100€ for the rest).

The firmware is now rather complete and well tested (by me :), here are the features:

  • 6 voice polyphony using hybrid synthesis (Digital "single cycle" oscillators / analog VCF and VCA).
  • 2 synchronizable oscillators per voice, duty cycle modulation on any waveform, 2 waveforms mix modulation (on oscillator 1), "grith" modulation (from a subtle veil to "ring modulation"-like sounds).
  • 2 complete envelopes with lin/exp choice and looping.
  • 2 complete LFOs with 6 modulation destinations.
  • 1 noise generator.
  • Voice panning on the stereo output.
  • 400 patches stored on SDCard, Single cycles (AKWF, PRophetVS, ...) also stored on SDCard.
  • Sequencer / Arpeggiator.
  • USB Powered with USB MIDI and regular MIDI.

 If people show interest, I'll start designing the new PCB!